Let’s not take things too seriously today.
Instead, let’s make cupcakes with bubble gum frosting and use way too many sprinkles. Let’s be crafty and make gelatin bubble toppers, too. It’s easy and I’ll show you how!
I first saw the gelatin bubble technique weeks ago on Cake Central, and I’ve been dying to try it ever since. I wasn’t sure exactly what kind of treat I would make to put bubbles on – something soap themed seemed a little unappetizing, but I found my inspiration in a little dram bottle of LorAnn bubble gum flavor. In my experience, bubble gum flavored treats are a bit polarizing. I’ll admit that I was wary of adding the flavor to frosting, but it’s surprisingly good!
Ready to see how I made the bubbles?
Refer to these pictures as you read the tutorial. The first thing you’ll need to get is a pack of small balloons. Mine were 6-inch, and I inflated them to various small sizes, roughly 2-4-inches in diameter. Standard balloons are usually egg-shaped when inflated, but you can make them round by pinching the two ends of the balloons and tying the ends together.
The gelatin portion is fun -a tad messy, so have a wet dish towel handy for drips.
Now, let me be clear on something here, the toppers are purely decorative. Because they are simply made of gelatin and water, they don’t taste yummy. But they are so worth making for the effect! I couldn’t believe how well they turned out!
The gelatin will set on the balloon and feel rubbery at first, but over the course of 24 hours, it will become dry and very crisp. You can re-dip the bubbles after they are just set to make them darker and more sturdy. In the picture above, the balloon in the foreground was coated twice in gelatin. The balloon in the background was coated only once.
I think this makes a great little weekend project. And if you have kiddos, I can’t imagine them not wanting to get involved. It’s so fun and kind of fascinating, too!
Call these cupcakes an ode to your inner teeny-bopper. I have one that loves Lip Smacker lip gloss and slumber parties. (Okay, maybe just the idea of slumber parties, because sleep = everything.)
The grown-up me can’t wait to try these on another bubbly treat – champagne cupcakes! Perhaps they’ll be a new topper for these that I love so dearly.
Bubble Gum Frosted Cupcakes
- Small balloons
- 2 packages .25 oz each, about 2 tablespoons powdered gelatin
- 1 or 2 drops liquid food color I used 1 drop of red
- 4 tablespoons cold water
- 1/8 teaspoon white or silver pearl luster dust
- Clear vegetable shortening
- Small artists’ brush
- Grid cooling rack
- 1 cup granulated sugar
- 1/2 cup/113g unsalted butter
- 2 large eggs
- 1 tablespoon vanilla extract
- 3/4 teaspoon salt
- 2 teaspoons baking powder
- 3/4 teaspoon baking soda
- 1 2/3 cups all-purpose flour
- 1/2 cup heavy cream
- 1/2 cup full fat sour cream
- 1/2 cup/113g of unsalted butter softened
- 1 cup/128g confectioners’ sugar
- 2-4 drops LorAnn concentrated bubblegum candy flavor to taste
- Pastel star confetti sprinkles
- 15 + gelatin bubbles see tutorial
- * Milk or heavy cream optional
- Fill a balloon 1/3 to 1/4 full of air. Pinch the balloon at both ends (the blown up/bulbous end and the open end) and tie the two together. This will help the balloon achieve a more round, bubble-like shape. Repeat process with remaining balloons. Balloons tend to attract fibers and particles (hello static electricity!) so place them on a dust-free surface.
- Brush the balloons with a little vegetable shortening, then use your fingers to completely coat the balloon. Use a paper towel to wipe off most of the vegetable shortening you just applied. There will still be a very thin residue of shortening left behind. If too much of the shortening is left on the balloon, the gelatin will not stick!
- In a small microwave-safe bowl, quickly whisk together the gelatin, food color, luster dust and cold water. It will become thick almost immediately. Let gelatin stand 5 minutes.
- Heat the gelatin in the microwave for 10 seconds, or until it is completely melted. Let the mixture stand until lukewarm.
- Hold a balloon by the knot and dip it into the gelatin, rotating it to coat the sides and avoiding the knot. Hold the balloon upright (knot to the bottom) and allow the excess to drip back into the bowl. Transfer the balloon to the grid cooling rack knot-side down. (I placed the balloon knot into an open grid.) Allow the balloon to dry for 5-10 minutes. Repeat with remaining balloons. Re-dip balloons in the gelatin. You may need to re-heat the gelatin mixture in the microwave for 3-4 seconds. The balloons will feel rubbery at first, but will dry to a firm, crisp shell over a 24 hour period.
- Once the balloons are completely dry, you can remove the balloon. Start by snipping a hole with scissors right beside the tied knot. As the air escapes, the balloon should pull away from the sides of the gelatin. Using the scissors again, cut a larger hole in the bottom of the balloon and pull the balloon out with your fingers. If the gelatin layer is too thin, it may collapse. This happened to me a couple of times, but I was able to pop them back into place from the inside.
- Place the bubbles cut-side-down when decorating. They can be used on buttercream and attached to fondant with piping gel or corn syrup.
- The bubbles will keep for a long time. Store them in an air-tight container or zip-top bag until ready to use.
- Preheat oven to 350F. Line one cupcake pan with 12 paper liners, and a second cupcake pan with 3 liners.
- Beat together sugar and butter until lightened. Add the eggs one at a time, then increase mixer speed to high for two minutes or until batter is light and fluffy. Add the vanilla, salt, baking powder and soda; beat for another minute and scrape down the sides of the bowl.
- Stir together heavy cream and sour cream in a small bowl. Beginning and ending with flour, alternately add the flour and yogurt mixture. Beat well after each addition. Scrape down the sides of the bowl and beat again briefly.
- Spoon batter into the liners. Bake for 22-25 minutes, or until the cake springs back when pressed in the center. Let the cupcakes cool in the pan for 10 minutes, then turn out onto a wire rack to cool completely.
- In a stand mixer fitted with the whisk attachment, mix together the butter and confectioners’ sugar. Begin mixing on low speed until crumbly, and then increase to high and beat for 3 minutes. Add the bubblegum flavor to taste and beat until light and fluffy.
- Transfer mixture to a piping bag fitted with a 1/2-inch round tip, or use a zip-top bag with the corner snipped. Pipe frosting onto cupcakes in a large mound and sprinkle on the star confetti. Top each cupcake with one (or more!) gelatin bubble.
- *Note: If you find the buttercream is too stiff for piping, you may add milk or heavy cream 1 tablespoon at a time until the mixture is piping consistency.